Acceptance Mark
UL 1310 Lithium battery charger 120W
Lithium battery charger

JSAP-PN120CHXXXXYYYY is a portable 120 watt lithium battery charger with MCU programming and 3-stage charging mode. The charger has a sturdy mechanism and an efficient LLC circuit design.


JSAP-PN120CH05460020
UL 1310 Lithium battery charger 120W
Battery charger
Case Size : 174.5 x 74.4 x 41.1 mm


Features :
CEC compliant。
EN60335,UL1310 compliant。
Small Sized。
 
Application :
Electric bicycle.
Electrical tools.
Scooter.
Any Protable Device or Machine。

Input / Output Specification :
Input voltage : 100 - 240VAC(Limits : 90 - 264VAC) 。
Input frequency : 50 to 60Hz (Limits:47 - 63Hz) 。
Input current : 2A(rms) for 90 VAC,100A(rms) for 264 VAC。
Output voltage : 12 ~ 48VDC ( ± 5% tolerance) 。
Output power range : 120W Max.。
Over voltage protection : 120 % min。
Over current protection : All outputs protected to short circuit conditions。
Short Protection : Auto Recovery
Load regulation : ±5% variations from minimum to maximum output current。


General Specifications :
Operating temperature : -10℃ ~ + 45℃。
Storage temperature : -40℃ to + 75℃。
Operating Relative Humidity : 5% to 95% non - condensing。
Withstand Voltage : AC 3000V ( Min ),5mA ( Max )。
Insulation Resistance : DC 500V 100MΩ ( Min )。
Safety : UL,cUL,GS,CE,FCC,SAA,MEPS,CEC,PSE,CCC,CB,C - Tick。


BNNAER.jpg